基于累积损伤理论的土石坝地震永久变形分析

以龙冈的在不规则荷载作用下土体应变的累积损伤理论为基础,提出了基于累积损伤理论的土石坝地震永久变形分析方法。采用大型静力和动力三轴仪,对某土石坝筑坝材料的静动变形特性进行了试验研究,确定了筑坝材料的静力和动力应力应变关系、累积应变模型和相应的材料参数。利用该方法,分别对在日本2008年6月14日岩手—宫城内陆M7.2级地震作用下该土石坝的在建坝体和竣工后坝体的地震永久变形特性进行了研究。结果表明：在建坝体的坝内沉降计算值与现场实测值基本吻合,并且通过与其它土石坝实测值的比较,说明竣工后坝体的坝顶沉降预测值在合理范围之内。     

Palladium‐Catalyzed Three‐Component Reaction of 3‐(Tri‐n‐ butylstannyl)allyl Acetates,Aldehydes, and Triorganoboranes: An Alternative to the Carbonyl Allylation Using α,γ‐Substituted Allylic Tin Reagents

A three‐component reaction of 3‐(tri‐n‐butylstannyl)allyl acetates, aldehydes, and triorganoboranes in the presence of a palladium‐Xantphos catalyst system predominately gave (E)‐anti‐homoallylic alcohols with high diastereoselectivity and good to high levels of alkene stereocontrol. An efficient chirality transfer was observed when an enantioenriched substrate was employed. The reaction was initiated by the formation of an allylic gem‐palladium/stannyl intermediate, which subsequently underwent allylation of the aldehyde by an allyltributyltin followed by a coupling reaction of the in‐situ‐generated (E)‐vinylpalladium acetate with the triorganoborane.

     

The World robot summit disaster robotics category – achievements of the 2018 preliminary competition

The World Robot Summit is a robot Olympics and aims to be held in a different country every four years from 2020. The concept of the Plant Disaster Prevention challenge is daily inspections, checks, and emergency response in industrial plants, and in this competition, robots must carry out these types of missions in a mock-up plant. The concept of the Tunnel Disaster Response and Recovery challenge is emergency response to tunnel disasters, and is a simulation competition whereby teams compete to show their ability to deal with disasters, by collecting information and removing debris. The Standard Disaster Robotics challenge assesses, in the form of a contest, the standard performance levels of a robot that are necessary for disaster prevention and emergency response. The World Robot Summit Preliminary Competition was held at Tokyo Big Sight in October 2018, and 36 teams participated in the Disaster Robotics Category. UGVs and UAVs contended the merits of new technology for solving complex problems, using core technologies such as mobility, sensing, recognition, performing operations, human interface, autonomous intelligence etc., as well as system integration and implementation of strategies for completing missions, gaining high-level results.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Chained aggregation model with minimum truncation error

A reduced–order model for a multi–input single–output or a single–input multi–output continuous system is proposed. The model is especially suitable for the case where accuracy in the high-frequency region is important. It also satisfies basic conditions for reduced-order models, such as uniqueness, stability, and a simple calculation requirement. Chained aggregation with the minimization of truncation errors introduces an internal system representation characterized by a system matrix of Hessenberg form and a diagonalized covariance matrix.     

Inelastic constitutive equation of plasma-sprayed ceramic thermal barrier coatings

Ceramic thermal barrier coatings (TBCs) are a very important technology for protecting the hot parts of gas turbines (GTs) from a high-temperature environment. The coating stress generated in the operation of GTs brings cracking and peeling damage to the TBCs. Thus, it is necessary to evaluate precisely such coating stress in a TBC system. We have obtained a stress-strain curve for a freestanding ceramic coat specimen peeled from a TBC coated substrate by conducting the bending test. The test results have revealed that the ceramic coating deforms nonlinearly with the applied loading. In this study, an inelastic constitutive equation for the ceramic thermal barrier coatings deposited by APS is developed. The obtained results are as follows: (1) the micromechanics-based constitutive equation was formulated with micro crack density formed at splat boundary, and (2) it was shown that the numerical results for a nonlinearly deformed beam simulated by the developed constitutive equation agreed with the experimental results obtained by cantilever bending tests.     

Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

The structural changes in mechanically mixed metals of immiscible combinations of elements caused by bulk mechanical alloying (MA) through the use of high pressure torsion (HPT) were investigated in Ag–Ni and Nb–Zr systems. There was no alloying between Ag and Ni on atomic scale even after 100 rotations of HPT. On the other hand, the β-Zr phase started to appear after HPT 2 rotations in the Nb–Zr system, even though β-Zr is a high temperature phase. Further, Nb and Zr were completely mixed to form a bcc structured single phase after HPT 100 rotations. The sequence of alloying in the Nb–Zr system during HPT was discussed. These results clearly suggest that non-equilibrium phases can form in the Nb–Zr system by bulk MA by the use of HPT.     

Porous ceramics mimicking nature—preparation and properties of microstructures with unidirectionally oriented pores

Porous ceramics with unidirectionally oriented pores have been prepared by various methods such as anodic oxidation, templating using wood, unidirectional solidification, extrusion, etc. The templating method directly replicates the porous microstructure of wood to prepare porous ceramics, whereas the extrusion method mimics the microstructures of tracheids and xylems in trees. These two methods are therefore the main focus of this review as they provide good examples of the preparation of functional porous ceramics with properties replicating nature. The well-oriented cylindrical through-hole pores prepared by the extrusion method using fibers as the pore formers provide excellent permeability together with high mechanical strength. Examples of applications of these porous ceramics are given, including their excellent capillary lift of over 1 m height which could be used to counteract urban heat island phenomena, and other interesting properties arising from anisotropic unidirectional porous structures.